Sustainable Dyeing And Finishing

Q
uality, economic efficiency and, more and more, ecological methods are the prerequisites
for up-to-date production in the dyehouse. Color shade and depth must be attainable, and there
should be adequate levelness and accurate fastness properties. Appropriate mechanical and chemical
processing is necessary to suit customer requirements as well as to create the required fabric hand
and surface characteristics.

Economical and ecological efficiency involves minimization of costs and maximum profit as
well as reproducible quality with minimal environmental damage. Therefore, process optimization is
a must to fulfill all parameters and requirements for right-first-time production. Western
wet-finishing costs are more and more apparent in various Asian countries as well, and can be
divided into the following approximate cost proportions:

• 42-percent labor;
• 29-percent dyestuffs and chemicals;
• 6-percent water;
• 12-percent energy;
• 6-percent environment and safety measures; and
• 5-percent maintenance.

Requirements


The catalog of modern, up-to-date dyestuffs and dyeing and finishing equipment offers a
blend of modern technology and chemistry. Major requirements are as follows:

• reduced water consumption;
• varying load capacity;
• time savings;
• comparable economy and ecology;
• highly optimized rinsing processes;
• controller units;
• downstream processing advantages;
• wet finishing process;
• economical finishing; and
• monitoring and controlling.

Cornerstone Research And Development


“Sustainability is one of the companies’ three topics in R&D, besides ecology and best
quality output,” states Germany-based Fong’s Europe GmbH, formerly Then Maschinen GmbH and Goller
Textilmaschinen GmbH. “As the inventor of the short liquor ratio technology, the company ever since
put a lot of emphasis on sustainability.”

At Thies GmbH & Co. KG, Germany, the main emphasis is on the efficiency and
sustainability of its products and proceedings, according to the motto, “Go green with Thies.” All
of the company’s yarn- and piece-dyeing machines reduce process times and energy as well as other
resource usage. Thies reports its iMaster H20 presents pioneering innovations including versatility
and adaptability, and offers the dyer product flexibility, which Thies says has never been obtained
before now.

For Fong’s Europe, the most successful model is still the Then-Airflow® Synergy, whose
latest version is model SYN 600 G2. The main reason for this success, the company reports, is the
Airflow technology itself. “The technology is unrivaled in batch dyeing with its unbeatable dyeing
economy and dyeing ecology, resulting in huge savings and typically offering one batch more per
day, not to mention the wide range of fabrics,” Fong’s Europe explains, noting that the comparison
with a model from some five to 10 years ago shows some significant improvements: Because of the
30-percent-greater batch size and technical machine design improvements — including new nozzle
section, wheel and flexible chamber device, and the power rinse system — overall water, energy and
chemicals consumption could be further reduced by around 15 to 20 percent.

On the other hand, Thies remarks that the liquor ratio doesn’t play as important a role as
in the past. The importance today relates more to consumption in liters of water per kilogram of
goods (l/kg). Today, the influence of the product on water consumption is greater than the
influence of the system. The fleet relationship detail only tells how much water per treatment bath
is used; it does not give the number of required baths. The detail of water consumption in l/kg,
however, gives information about system efficiency.

Sustainable Dyestuffs


Huntsman Textile Effects, Singapore, mentions that the textile industry is notorious for
consuming vast amounts of water, especially during dyeing and finishing. Up to 100 liters of water
are used to dye 1 kg of cotton fabric. The company has been able to improve dyeing technology
considerably with the development of a new chemistry for dyeing of cellulosic fibers. AVITERA™ SE
is a new tri-reactive dye range for exhaust application on cellulosic fibers.

Only 15 to 20 liters of water are required to dye 1 kg of material. Avitera SE dyes and
ERIOPON® LT clearing additive comply with new environmental sustainability standards and give
top-quality results, achieved in time, Huntsman reports, adding that the process also saves time
and energy and reduces carbon dioxide (CO2) emissions; and that with the new dyeing technology, 1.3
liters of fresh water per person per day potentially could be saved in textile-processing countries
such as China, India or Bangladesh.

Most reactive dye molecules have one or two reactive groups that bond with the fiber and
remain permanently fixed. Dye that fails to bond is hydrolyzed and cannot be fixed on the fiber. In
conventional dyeing, 20 to 40 percent of the dye molecules typically are hydrolyzed. To achieve
highly colorfast fabrics, unfixed dye needs to be fully removed — a long, hot, expensive, water-
and energy-intensive process.

Best Available Technology (BAT) improves conventional warm dyeing systems, and already
consumes less water during the washing-off process. When using Avitera SE and Eriopon LT, the
dyeing and washing-off processes require temperatures no higher than 60°C, and the number of
rinsing baths needed to obtain the required colorfastness is greatly reduced, Huntsman reports.

Tentering


Tentering is virtually the most important process after dyeing to give a fabric the required
properties. A. Monforts Textilmaschinen GmbH & Co. KG, Germany, a leader in the global tenter
market, says that rising cost pressure remains a major issue in the textile industry, especially
for textile finishing. Reasons include steadily rising energy, water and effluent treatment costs;
consumer demand for green and responsibly made garments; and the need for textile finishing to be
very innovative. Therefore, modern textile finishing equipment must fulfill requirements such as
responsible use of natural resources, cost-effectiveness and high flexibility.

Monfort’s Montex 6500 tenters feature heat recovery systems, which are available for all
Montex tenters. The systems can reduce energy usage by up to 30 percent, saving both natural
resources and production costs. Even on existing machines, heat recovery systems can be added. The
Energy Tower 7000 is a universal stand-alone system providing the same performance as a built-in
system. Depending on the exhaust airflow and temperature, up to 30 percent of the heat generated
can be recovered. According to Monforts, very good access to the heat exchange modules and a large
condensed water tank make the Energy Tower very maintenance-friendly, with consistent performance
between maintenance cycles.

In the area of continuous dyeing processes on cotton, Monforts offers the Econtrol® process.
In contrast with pad-dry-thermofix or pad-dry-pad-steam processes, Econtrol dyeing using a Thermex
6500 Hotflue does not need a separate fixing process. According to Monforts, the Econtrol climate
inside the Thermex chamber ensures a perfect dyeing result during the drying process.

For dyeing of polyester/cotton blends, Monforts has now developed a single-bath process that
uses the Econtrol technique without intermediate reduction clearing. The process does not use
separate baths, and reduction clearing is not necessary, saving significant amounts of chemicals,
water and energy, as well as production costs.

Positive Future


For the near future, Fong’s Europe mentions more easy-to-handle machines that have the
lowest water and energy consumption, give best-quality results, and are reasonably priced. Thies
foresees a similar direction: Future developments will be directed by economics, but the
environment also will be taken into account. Suitable aftertreatments will be developed with the
target of recycling dyeworks effluent, and other developments will be aimed at emissions
reductions. There will be much movement in this area in the future.

April/May/June 2011