Trützschler: Serving The Nonwovens Industry

F
or decades, Germany-based Trützschler GmbH & Co. KG has been known as a premium
supplier of spinning preparation machinery. In 2006, the company acquired Germany-based nonwovens
machinery manufacturer Fleissner GmbH. Since that time, the group of companies, which also includes
Germany-based Erko Trützschler GmbH, has become a serious supplier of complete nonwovens lines.

In September 2008 during an open-house event, Fleissner presented new machinery at its
technology center in Egelsbach. For nonwovens manufacturing, the following new products were the
focus of attention:

New cards: Three machines will support the existing Fleissner AquaJet Spunlace
lines. The previous card has been replaced by the newly developed EWK-413 card from sister company
Erko Trützschler. It is designed to process up to 400 kilograms per hour (kg/h) and is said to
deliver carded polyester/viscose as well as cotton products. This means that all main components of
the high-speed spunlace process for carded products can be supplied from companies in the
Trützschler organization: fiber opening and blending, and carding machines from Erko Trützschler;
and spunlace and drying from Fleissner.

Small spunlace machine: The second new machine installed in the technology center
with the AquaJet line is the Trützschler TC 07-H card, which is said to have an improved machine
direction/cross direction ratio and together with the new Fleissner MiniJet spunlace machine offers
an economical solution. The machine is a tool to enter the spunlace nonwovens market, thanks to its
small size and production throughput. It mainly serves the needs not only of institutes and
companies conducting research and development, but also of producers in niche markets. The main
features of the quasi-plug-and-play machine are a working width of 50 or 100 centimeters (cm),
pressures of up to 400 bar and the possible integration of its specially designed foam padder into
the spunlace line. Fleissner decided to push the chemical bonding process, traditionally limited to
speeds of not more than 70 to 100 meters per minute (m/min), to line speeds of up to 200 m/min.



Belt oven technology: Also shown at the open house was Fleissner’s belt oven
technology for thermobonding of high-loft products. Webs from 200-cm up to 720-cm working width can
be processed. During the design phase, Fleissner paid special attention to providing highest energy
efficiency, lowest energy losses and easy access for maintenance. Working height and working width
adjustments are accomplished in a user-friendly way.

During the event at Fleissner,

Textile World Asia
had the opportunity to interview Dr. Michael Schürenkrämer, Trützschler Group board member.
Schürenkrämer discussed Trützschler’s strategy and expectations with regard to its expansion into
the nonwovens market.

Independent Supplier

TWA:
For decades, Trützschler has been one of the market leaders in spinning preparation. Now,
with the acquisition of Fleissner, the group is very active in nonwovens manufacturing. What were
the main reasons to expand the activities into this area?

Schürenkrämer: Trützschler already had delivered similar machinery for fiber
preparation in the nonwoven industry since the end of the 1960s. With the chute feeder for cards,
known by the name of Scanfeed, we even had solutions for special applications, which were not found
elsewhere on the market.

However, our product portfolio did not cover all requirements, even for fiber preparation,
and at the end of the day, we were merely subcontractors without any direct contact with the end
consumer in many cases. Furthermore, there was an ongoing consolidation process by our competitors.
For years, we were questioning ourselves whether to become totally independent or to abandon the
products. We preferred to do the first.

TWA:
Do you have an official group name for the nonwovens activities?

Schürenkrämer: No, not yet, but we think that with Trützschler Nonwoven, our
activities might be clear enough for everybody involved in this industry.

TWA
: Fleissner was sold by its founder to the Zimmer Group. Now, you have acquired Fleissner.
How did this happen?

Schürenkrämer: Well, we had heard that Zimmer wanted to sell Fleissner, and we
showed our interest. This was in 2006.

TWA:
Why just Fleissner?

Schürenkrämer: Fleissner, coming from the dryer area, developed over decades a
very broad product program holding different bonding technologies, particularly spunlace. In a link
with our machinery and that of Erko Trützschler, we now can offer complete lines. Our interest in
Fleissner was obvious, and the chance came to us.

TWA:
Are you satisfied with the business development since you have taken over Fleissner?

Schürenkrämer: To some extent, yes. For the nonwovens business, it represents our
cautious expectations, although we would have wanted it to be better. The man-made fiber area had
been very strong over the last years, and then it dropped. However, we already knew this situation
before the takeover.

TWA
: Were your expectations fulfilled?

Schürenkrämer: Yes, with regard to the common further development of the product
program. The fine-tuning in the group gets gradually better, and we have already concluded the
first project with all three companies. We are quite happy with the result, taking into
consideration the short period of time.

The Right Timing

TWA
: You can now offer complete lines for nonwovens made of staple fibers from one source only.
Why did you wait with the presentation until this Fleissner event?

Schürenkrämer: An open house event offers different possibilities of presenting
the available know-how and products as well as demonstrating all kinds of solutions.

TWA:
Why didn’t you do it at ITMA Asia?

Schürenkrämer: Now, we are able to present novelties that were not yet ready for
ITMA Asia.

TWA:
What is the ratio in your group of traditional applications to nonwovens?

Schürenkrämer: The ratio is about 2.5 to 1.

TWA:
How do you see Trützschler’s strengths in the nonwovens sector as a group and within the
individual companies?

Schürenkrämer: Total solutions are more attractive for many customers because of
the simplification of the project negotiations and implementations as well as warranty matters. For
this, however, it requires a wide supply range to be able to play an important role. We can claim
our role for many applications today. It’s nevertheless a usual practice for us to combine complete
lines on request of the customer and in cooperation with our competitors.

Furthermore, one of our strengths is our worldwide presence, which is already visible mostly
in the USA, because of the importance of the nonwovens business, followed by Brazil, but also India
and China, where we have our own production centers. In medium terms, all this will certainly bring
added value for our customers.

Erko Trützschler and Fleissner have their strengths in their products, the flexibility but
also in the respective services – each company in its own way, but this is certainly natural
because they have developed individually. The future lies in an even more intensive cooperation for
all involved companies.

TWA:
What is the organization regarding service, representations and such? Are these the same
people who are also responsible in the area of the classic textile industry?

Schürenkrämer: Some representations were merged with the spinning, and some not.
We did what is best for the individual markets.

TWA: Is the turnover for your nonwovens activities increasing?

Schürenkrämer: Basically, yes, but the period of time for our extended activities
in this field is still too short to give a firm answer.

TWA:
Were your turnover expectations fulfilled regarding nonwovens?

Schürenkrämer: Yes, with the exception of the mentioned situation of the man-made
fiber area. In my opinion, the combined activities of Trützschler and Erko, the extended product
line with the first needling machine from Erko, and the expectations of the customers that
Trützschler stands behind the two companies led to this pleasant situation.

TWA:
Is Trützschler’s nonwovens group complete, or are you considering further acquisitions?

Schürenkrämer: The product program is already rather homogeneous; however, it
takes time for everything to accrete – grow organically – together. We are already on the right
track, but there is still some homework to be done.

Market Situation

TWA
: How do you see the current market for nonwovens?

Schürenkrämer: I see it with mixed emotions. In spinning, we have had a dramatic
drop since the last few months of 2007. This situation was primarily characterized by
overcapacities built up in the Far East. The situation for nonwovens is different because of the
more differentiated product spectrum. Applications in the automotive area are also showing a
decrease, but other areas are growing. At present, we have a lot of projects, which gives us an
affirmative thinking. However, the realization is still a long time coming.

TWA
: How do you see the medium-term future for nonwovens?

Schürenkrämer: For years, the nonwovens business has shown growth rates above
average. There are great opportunities in this industry by using innovative approaches for new
applications and further growth. Creativity is needed to deal with the different applications and
to generate new products. As manufacturers of this machinery, we want to further support these
efforts.

Moreover, there are markets, like India, in which the nonwovens industry has not gained a
foothold at all yet. Much is said about nonwovens also from the spinning industry, but the
breakthrough hasn’t come yet. The search for the right products in an unknown territory is full of
risks, so one is understandably careful. On the other hand, there are already a number of
installations. All in all, we are convinced that we will have a further upswing if the general
conditions are positive.

---

Trützschler Group Companies In The Nonwovens Area

Trützschler – machinery for opening, feeders

Erko Trützschler – machinery for opening, cards, cross lappers, needlepunch
machines

Fleissner – machinery for hydroentanglement (spunlaced), thermal and chemical
bonding, through air dryers, impregnation, embossing

November/December 2008