Monforts Customer Kipaş Has Been Selected As The Sole Denim Manufacturing Partner In The €6.7 Million European Union-Funded New Cotton Project Involving The International Brands Adidas And H&M

MÖNCHENGLADBACH, Germany — November 30, 2020 — Monforts customer Kipaş has been selected as the sole denim manufacturing partner in the 6.7 million euro European Union-funded New Cotton Project, involving the brands adidas and H&M, working in a consortium with suppliers, innovators and research institutes.

Kipaş, based in Kahramanmaraş, Turkey, is currently installing its third Monforts Montex stenter along with a third Monfortex compressive shrinkage system in a combined configuration dedicated to denim production.

This follows the successful installation and commissioning of the second Montex and Monfortex lines at the Kahramanmaraş plant in 2018, which Kipaş Vice Chairman of the Board Ahmet Öksüz said had immediately exceeded expectations.

“We performed a very thorough technical investigation based on the latest Industry 4.0 analysis before the purchase, to determine what we needed, and the Monforts technology met all our requirements,” he said, in an interview with Textilegence magazine. “The Monfortex is equipped with a variety of features not found on classical shrinkage machines and the production can be monitored from beginning to end. It also exceeded our expectations in energy cost savings.”

Kipaş subsequently received a special certificate from Monforts in recognition of its exceptional utilization of the technology to its full potential.

Kipaş Vice Chairman of the Board Ahmet Öksüz (center) receives the certificate of excellence for machine utilization from Monforts Regional Representative Thomas Päffgen (left) and Ahmet Ciliç CEO of Neotek, the Monforts service partner in Turkey

The latest Montex tenter now being installed at Kipaş is a 12-chamber unit with a working width of 2 meters featuring all of the latest automation features. The Monfortex unit, also with a working width of 2 meters, is in a double rubber configuration, comprising two compressive shrinkage units and two felt calenders in line. This allows the heat setting of elastane fibers and the residual shrinkage of the denim to be carried out simultaneously, for a significant increase in production speeds.

“Around 90 to 95 percent of denim fabric production now contains elastane fibers and the Monforts system has allowed us to simultaneously increase our production and quality in this respect,” Öksüz said.

Regenerated cotton

For the next three years within the New Cotton Project, Kipaş will manufacture denim fabrics based on the cellulose-based fibers of Infinited Fiber Co. of Finland, made from post-consumer textile waste that has been collected, sorted and regenerated.

The patented technology of Infinited, which is leading the consortium of 12 companies, turns cellulose-rich textile waste into fibers that look and feel like cotton.

“We are very excited and proud to lead this project which is breaking new ground when it comes to making circularity in the textile industry a reality,” said Infinited Cofounder and CEO Petri Alava. “The enthusiasm and commitment with which the entire consortium has come together to work towards a cleaner, more sustainable future for fashion is truly inspiring.”

Take-back programs

Adidas and H&M will establish take-back programs to collect the clothing that is produced, to determine the next phase in their lifecycle. Clothing that can no longer be worn will be returned to Infinited, for regeneration into new fibers, further contributing to a circular economy in which textiles never go to waste, but instead are reused, recycled or turned into new garments.

The aim is to prove that circular, sustainable fashion can be achieved today, and to act as an inspiration and stepping stone to further, even bigger circular initiatives by the industry going forward.

The European Union has identified the high potential for circularity within the textile industry, while simultaneously highlighting the urgent need for the development of technologies to produce and design sustainable and circular bio-based materials. Making sustainable products commonplace, reducing waste and leading global efforts on circularity are outlined in the European Commission’s Circular Economy Action Plan.

Fashion brands produce nearly twice as many clothes today as they did 20 years ago and demand is expected to continue growing. At the same time, the equivalent of one garbage truck of textiles is landfilled or burned every second. Most of the textile industry’s environmental problems relate to the raw materials used by the industry — cotton, fossil-based fibers such as polyester, and viscose as the most common man-made cellulosic fiber, are all associated with serious environmental concerns.

Posted November 30, 2020

Source: A. Monforts Textilmaschinen GmbH & Co. KG